Our hardware products include a wide range of intelligent card readers, multifunction terminals, door controllers and additional modules, which have been developed for use in access control, time recording, time management, intruder alarm systems and building automation.
The knob module is a universally applicable, battery-operated locking unit that is used here as follows:
In a profile cylinder with an electronic freely rotating knob on one side and a mechanically fixed rotary knob on the other side.
The communication electronics and the mechatronics are located in the knob module together with the batteries. In addition to the tried-and-tested radio version [868 MHz], the knob module is also available as a version with Bluetooth® Low Energy (2.4 GHz).
By installing the knob module using a Euro profile cylinder, conventional locks for DIN Euro profile can be used and no complex installation is required. This means that the double knob cylinder can be used cost-effectively for both new buildings and existing properties.
Technical data:
Reading method:
MIFARE® Classic
MIFARE® DESFire® EV1/EV2/EV3
No wiring required
Access on Card capability: authorizations are read from the badge (data is encrypted)
Network on Card capability: authorizations are read from the badge, badge-related events (access & alarm) are written back to the badge (data is encrypted)
Authorizations are written to the badge via access reader and/or time terminal.
Radio connection (868 MHz) via XMP-K32/CMM (if there is no radio connection, the knob module reads the access authorizations from the badge (optional))
In accordance with DIN 18252 & DIN EN 1303 where applicable for electronic systems
Certified according to DIN EN 15684
Suitable for use in fire doors
Suitable for use in PZ locks
Can be used in emergency exit doors in accordance with DIN EN 179 and panic locks in accordance with DIN EN1125
Profile cylinder lengths 26/26mm or 30/30mm to 70/70mm in 5mm increments. Oversizes on request.
Automatic wake-up of the knob module by holding up a badge
Emergency power supply possible when batteries are flat
Battery replacement and removal only possible with special authorization
Suitable for outdoor use (IP66)
Automatic summer/winter time changeover
Public holiday calendar up to 4 years in advance
Up to 1,000 events can be logged in the knob (AoC)
Office function and time-controlled opening/closing can be combined (automatic continuous engagement without additional power consumption)
Programmable coupling time from 1 to 15 seconds (plus actuation time)
“Area” authorization writing possible via access reader (e.g. reader 1 writes access level 100 to 200 on the badge, reader 2 writes access level 201 to 300 on the badge, etc.), application e.g. for different locations/buildings of a company and/or limited storage space on the badge
Data is only written to the badge in the event of database changes or expiry of offline authorization (saves time at turnstiles, etc.)
Blacklist function
The compact knob cylinder is a profile cylinder with an electronic, freely rotating knob.
All essential security-relevant components, such as the clutch, gear and motor, are located in the protected area of the cylinder. In addition to the proven radio version (868 MHz), the compact knob module is also available as a version with Bluetooth Low Energy (2.4 GHz).
The compact knob is particularly suitable for tubular frame doors, as it has a small electronic knob and therefore allows sufficient clearance for opening the door even with small backsets.
The VDS security version is also equipped with special anti-drilling mechanisms. This makes the compact knob particularly suitable for use in building connection doors or other doors that require a higher level of mechanical burglary protection.
Technical data:
Reading method:
MIFARE® Classic
MIFARE® DESFire® EV1/EV2/EV3
No wiring required
Access on Card capability: authorizations are read from the badge (data is encrypted)
Network on Card capability: authorizations are read from the badge, badge-related events (access & alarm) are written back to the badge (data is encrypted)
Authorizations are written to the badge via access reader and/or time terminal.
Radio connection (868 MHz) via XMP-K32/CMM (if there is no radio connection, the knob module reads the access authorizations from the badge (optional))
In accordance with DIN 18252 & DIN EN 1303 where applicable for electronic systems
Certified according to DIN EN 15684
Suitable for use in fire doors
Suitable for use in PZ locks
Can be used in emergency exit doors in accordance with DIN EN 179 and panic locks in accordance with DIN EN1125
Profile cylinder lengths 26/26mm or 30/30mm to 70/70mm in 5mm increments. Oversizes on request.
Automatic wake-up of the knob module by holding up a badge
Emergency power supply possible when batteries are flat
Battery replacement and removal only possible with special authorization
Suitable for outdoor use (IP66)
Automatic summer/winter time changeover
Public holiday calendar up to 4 years in advance
Up to 1,000 events can be logged in the knob (AoC)
Office function and time-controlled opening/closing can be combined (automatic continuous engagement without additional power consumption)
Programmable coupling time from 1 to 15 seconds (plus actuation time)
“Area” authorization writing possible via access reader (e.g. reader 1 writes access level 100 to 200 on the badge, reader 2 writes access level 201 to 300 on the badge, etc.), application e.g. for different locations/buildings of a company and/or limited storage space on the badge
Data is only written to the badge in the event of database changes or expiry of offline authorization (saves time at turnstiles, etc.)
Blacklist function
The electronic door handle is compatible with numerous European lock standards. The different variants allow it to be used in all standard doors such as timber, steel, aluminum and narrow frame doors with a backset of more than 20 mm. This means that the electronic door handle can be used for both new builds and existing projects and, thanks to its timeless, simple stainless steel design, adapts to any environment.
The reader unit with the communication electronics is located in the lever handle. In addition to the proven radio version (868 MHz), the lever handle is also available as a Bluetooth Low Energy version (2.4 GHz).
Technical data:
Reading method:
MIFARE® Classic
MIFARE DESFire® EV1/EV2/EV3
No wiring required
Access on Card capability: authorizations are read from the badge (data is encrypted)
Network on Card capability: authorizations are read from the badge, badge-related events (access & alarm) are written back to the badge (data is encrypted)
Authorizations are written to the badge via access reader and/or time terminal.
Radio connection (868 MHz) via XMP-K32/CMM (if there is no radio connection, the XMP-CX reads the access authorizations from the badge (optional))
Complies with common European lock standards (existing locks can be used)
Suitable for fire and smoke protection doors (depending on version)
Choice of different lever handles
Door fittings for timber, steel and aluminum doors with narrow or wide frames, with backset greater than 20 mm
Lever handles suitable for doors with a thickness of 30 to 110 mm
Square thicknesses in 7 mm, 8 mm, 8.5 mm, 9 mm and 10 mm
Existing DIN drill holes can usually be used
Automatic wake-up of the fitting by holding a badge in front of it
Battery change possible with special tool
Automatic summer/winter time changeover
Public holiday calendar up to 4 years in advance
Up to 1,000 events can be logged in the fitting (AoC)
Office function and time-controlled opening/closing can be combined (automatic continuous engagement without additional power consumption)
Programmable engagement time from 1 to 15 seconds (plus actuation time)
“Area” authorization writing possible via access reader (e.g. reader 1 writes access level 100 to 200 on the badge, reader 2 writes access level 201 to 300 on the badge, etc.), application e.g. for different locations/buildings of a company and/or limited storage space on the badge
Data is only written to the badge in the event of database changes or expiry of offline authorization (saves time at turnstiles, etc.)
Blacklist function for AoC and NoC
The electronic door fitting is compatible with numerous European lock standards. The different variants allow it to be used in all standard doors such as timber, steel, aluminum and narrow frame doors with a backset of more than 25 mm. This means that the CXx172 can be used for both new builds and existing projects and, thanks to its timeless, simple stainless steel design, adapts to any environment.
The wide fitting is particularly suitable for existing doors, as existing holes are covered, while the narrow version is particularly suitable for use in tubular frame doors. The door fitting with short backplate is particularly suitable for installation in fire and noise protection doors, as the drilling pattern corresponds exactly to the standard drill holes for short backplate fittings.
In addition to the proven radio version (868 MHz), the door fitting is also available as a version with Bluetooth Low Energy (2.4 GHz).
Technical data:
Reading method:
MIFARE® Classic
MIFARE DESFire® EV1/EV2/EV3
No wiring required
Access on Card capability: authorizations are read from the badge (data is encrypted)
Network on Card capability: authorizations are read from the badge, badge-related events (access & alarm) are written back to the badge (data is encrypted)
Authorizations are written to the badge via access reader and/or time terminal.
Radio connection (868 MHz) via XMP-K32/CMM (if there is no radio connection, the XMP-CX reads the access authorizations from the badge (optional))
Complies with current European lock standards (existing locks can be used)
Available in narrow and wide versions
Impact-resistant, robust housing made of stainless steel with 1.8 mm wall thickness
Choice of different lever handles
Door fittings for timber, steel and aluminum doors with narrow or wide frames, with backset greater than 30 mm
Existing DIN drill holes can usually be used
Suitable for use in fire doors
Automatic wake-up of the fitting by holding a badge in front of it
Battery change possible with special tool
Automatic summer/winter time changeover
Public holiday calendar up to 4 years in advance
Up to 1,000 events can be logged in the fitting (AoC)
Office function and time-controlled opening/closing can be combined (automatic continuous engagement without additional power consumption)
Clutch time programmable from 1 to 15 seconds (plus actuation time)
Clutch mechanism up to 60 Nm
“Area” authorization writing possible via access reader (e.g. reader 1 writes access level 100 to 200 on the badge, reader 2 writes access level 201 to 300 on the badge, etc.), application e.g. for different locations/buildings of a company and/or limited storage space on the badge
Data is only written to the badge in the event of database changes or expiry of offline authorization (saves time at turnstiles, etc.)
Blacklist function for AoC and NoC
